2TKA130015G1 ABB ⍾ AS8.13
Wall clamps offer a rapid means of attaching a mounting box to a 12-13 mm thick board wall. Wall clamp AS8.13 is available for 12 - 13 mm. The hole is made with an AT5 hole saw (Ø 74 mm), and the board clamps are placed on either side of the board. The box is pushed through the hole from behind the board, and becomes locked between the board clamps.
- Catalog description
- AS8.13 Wall clamp
- Customs tariff number
- 39259080
- Weight
- 0.0034 kg
- Dimensions
- (WxHxD/L) 0.018 m x 0.028 m x 0.06 m
- EAN
- 6410011527689
Related in Other Accessories ⍾ Page 1
-
2TKA00003691
Interconnector AS8.3 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With interconnector AS8.3 the distance between box ce …
-
2TKA001709G1
Support AS13.12 is used in wall installations with junction box AU8. By using the support, the open end of the box and the plate can be brought to the same level. Fits walls with 1 …
-
2TKA001712G1
Truss fixture AS26.12 is used with the box AU5.5 in single and double board walls.With the boxes AU60 and AU 60.1 it is used in sigle board walls. The truss fixture includes nailin …
-
-
-
-
2TKA130008G1
The AS15 is designed to be used as a connector between AUS15.2 mounting boxes. Open needed knock-out holes on mounting boxes for the interconnector and install the boxes on the wal …
-
-
2TKA130044G1
Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2 …
-
2TKA130045G1
The PMR490 interconnector is used to link together mounting boxes when groups of installation boxes that house weak and strong current circuits are installed under different coverp …
-
2TKA130046G1
The connecting piece PMR502 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With connecting piece PMR502, the distance bet …
